USB to RS485/RS422 convert/transmissi
Maximum transmission 1200
Communication baudrate 300~460800bps
Compatibility of USB 2.0, RS485, RS422 standard protocol
DT-5119 is an industrial level cable for USB to RS485/USB422 converting and transmission. With optional length of 0.5m/1.2m/2./3./5m, it can be used to connect pan tilt control with laptop for the pan tilt control based on Pelco D protocol.
Model | DT-5119 | |
Product | USB to RS485/RS422 convert cable | |
Interface Compatibility | RS485/RS422 standard | |
Communication | Asynchronous differential transmission (Full/half Duplex) | |
Transmission Rate | 300~460800bps | |
Working Temperature | -20℃~70℃ | |
Working Humidity | 5%~95% | |
Protection | 600W lighting surge protection for each wire of RS485 | |
Transmission Media | Twisted pair (Wire diameter ≥0.5mm) or shielded wire | |
Signal Indicator | Red-power; green-send signal; yellow-receive signal | |
Transmission Distance | 1200 meter for RS422/485; less than 5 meter for USB | |
Optional Length | 0.5m/1.2m/2m/3m/5m |
BIT-PT5119 USB to RS485/RS422 convert able is used to connect between laptop and pan tilt unit for its control.
Yes, a driver disk and user manul are included in the package. Driver is required to install before use.
Pelco D protocol is used for pan tilt control all the time.
2400/4800/9600/19200bps are supported.
Leave us Message